No-Burn®, Inc. announces renewal of their evaluation report, ER #305. The industry may utilize the report for compliance with the 2015, 2012, 2009 and 2006 iCodes. Renewal of ER #305 showcases No-Burn® in compliance with surface burning characteristics as an interior finish, alternate thermal and ignition barriers and fire resistance. Applied to substrates listed in ER #305, No-Burn® is an innovative …
IAPMO UES UER 0305 No-Burn®, Inc. announces the issuance of their new evaluation report. The evaluation report is a product of a partnership between IAPMO Uniform Evaluation Services (UES) and No-Burn®, Inc. No-Burn®, Inc. as a premier manufacturer of intumescent and fire retardant coatings, is widely respected and relied upon for coatings solutions and technical feasibility. For …
No-Burn® Plus XD is now approved over BASF’s ENERTITE® NM, ESR-3102, at the lowest tested wet mil thickness, surpassing previous results. The test was performed in accordance with AC377 Appendix X. Plus XD, used in lieu of a prescribed ignition barrier for the ENERTITE® NM and Plus XD assembly, applied at a thickness of 6 mils wet (4 …
We’re proud to announce that No-Burn®, Inc. (NBI) continues to partner with Huber Engineered Woods (HEW) showcasing domestically manufactured products for the building community. Tested to comply with HEW’s R-Sheathing panels where foam plastics are exposed in attics, No-Burn® Plus XD may be applied as an ignition barrier alternate to meet code (IBC® and IRC®). Technical info: …
No-Burn®’s Plus XD has successfully tested with Bayer’s Bayseal OC to meet the IRC® and IBC® requirements where spray polyurethane foam insulation is exposed in attics and crawlspaces. Where entry is limited, the use of a non-prescriptive, alternate ignition barrier or intumescent coating is permissible and preferred. Certified installers, nationwide, may take advantage of this system to …
For Immediate Release 24 April 2013 www.noburn.com Celebrating 15 years in business, No-Burn®, Inc. (NBI) commemorated by releasing a new website, an App to enhance reporting ease and welcomed aboard new affiliates and staff. Over the past 15 years, NBI’s continued commitment to quality has positively impacted educational and business development efforts, furthering certified applicator credibility, the …
For Immediate Release 23 May 2012 www.noburn.com Contact: Lindsay Lenze No-Burn® Intumescent and Fire Retardant Coatings Meet Low VOC Content and Emission Standards Intumescent and fire retardant coatings are held to the same VOC content and emission standards as interior, flat latex coatings and paints. Intumescents and fire retardants differ drastically, from a performance standpoint, when compared …
For Immediate Release 28 November 2011www.noburn.comContact: Lindsay Lenze No-Burn® Plus XD Approved at Lowest Wet Mil Thickness Over Sealection® 500 Plus XD Coating over Foam Plastic Insulation System MeetsAC377 Appendix X Requirements at Lowest Wet Mil Thickness No-Burn® Plus XD is now approved over Demilec’s Sealection® 500 at the lowest tested wet mil thickness, surpassing previous results. The test was …